|
White Papers
SEAW White Papers White Paper
#1-2011
April 2011 | Code Comparison for Seismic Design from the IBC 2006 to IBC 2009 SEAW Earthquake Engineering Committee - Tom Xia, Chair | | | | White Paper
#2-2009
December 2009 | Study of Structural Failures Associated with the Winter 2008-2009 Snow Event in the Spokane/Coeur d'Alene Area
SEAW Spokane Chapter ad hoc committee- Robert Graper, chair | | | | White Paper
#1-2009
November 2009 | Special Reinforced Concrete Shear Walls as Building Frame Systems for Mid- and High-Rise Buildings
SEAW Earthquake Engineering Committee - Tom Xia, chair |
WABO - SEAW White Papers
Submitted by the WABO/SEAW Liaison Committee
J Mark D'Amato, SEAW Contact White Paper #8
December 2010 | Guidelines for Determining Snow Loads
in Washington State | | | | White Paper #6a
April 2010 | Phased Approvals in Permitting | | | | White Paper #5
March 2011 | Guideline: Post-Disaster Contract Safety Evaluations | | | | White Paper #4
March 2009 | Structural Permit Submittal Guidelines | | | | White Paper #3
December 2006 | Guideline for Determining Wind Loads on Structures
-Use of SEAW's "Handbook to a Rapid-Solutions
Methodology(tm) for Wind Design of Buildings" | | | | White Paper #2
August 2006
| Wet Sealing and Signing of Structural Submittals | | | | White Paper #1
May 2006 | Guideline - Structural Plan Review Philosophy | | | | WABO/SEAW
August 2000 | Snow Load Regulations and Engineering Practices
-Washington State | | | |
| 
