Calendar
Prev MonthPrev Month Next MonthNext Month
SEAW/PEER Seminar: TBI Guidelines for Performance-Based Seismic Design of Tall Buildings, Version 2.02
Seattle University, Pigott Auditorium
Su Campus Walk
Seattle WA, 98122
Thursday, November 02, 2017, 12:30 PM - 5:00 PM PDT
Category: SEAW Events

Registration Fees:
$230 - Standard Rate ($185 Early Bird)
$185 - SEAW Member Rate

Early bird rates end October 17


Agenda

12:30 - 5:00 PM

Introduction/Overview - Jack Moehle, UC Berkeley

Seismic Hazard and Geotechnical - Jonathan Stewart, UCLA (SF & LA), CB Crouse, AECOM (Seattle)

Structural Modeling - Greg Deierlein, Stanford University

Acceptance Criteria - Ron Hamburger, Simpson Gumpertz & Heger

Case Studies - John Hooper, Magnusson Klemencic Associates

Additional Considerations - Jack Moehle, UC Berkeley


TBI Guidelines for Performance-Based Seismic Design of Tall Buildings, Version 2.02

This seminar will highlight revisions incorporated into the just published Pacific Earthquake Engineering Research (PEER) Report No. 2017/06: “Guidelines for Performance-Based Seismic Design of Tall Buildings, Version 2.02,” prepared by a TBI Working Group led by cochairs Ron Hamburger and Jack Moehle, with contributions from Jack Baker, Jonathan Bray, C.B. Crouse, Greg Deierlein, John Hooper, Marshall Lew, Joe Maffei, Stephen Mahin, James Malley, Farzad Naeim, Jonathan Stewart, and John Wallace.

These guidelines present a recommended alternative to the prescriptive procedures for seismic design of buildings contained in the ASCE 7 standard and the International Building Code (IBC). Properly executed, these Guidelines are intended to result in buildings that are capable of reliably achieving or exceeding the seismic performance objectives intended by ASCE 7, and in some aspects where specifically noted for Risk Categories II, III, and IV. The Pacific Earthquake Engineering Research Center published a first edition of these Guidelines in 2010 in response to the growing use of alternative performance-based approaches for seismic design of tall buildings. Newly released Version 2.02 addresses new knowledge including lessons learned in application of the first edition on many projects. 

Seminar participants can receive a copy of the presentations as well as a hardcopy of the updated Guidelines.


Who Should Attend

The intended audience includes structural engineers and building officials engaged in seismic design and review of tall buildings. Attendees will receive 4 PDHs.

Register Now!


Contact: info@seaw.org or (206) 209-5283